Standard Operating Procedures (SOPs) are required for all Class 3B and Class 4 lasers and laser systems (including imbedded lasers if hazards are accessible), and must be approved by the Laser Safety ...

When using a Class 3B or Class 4 laser, potential hazards from the direct beam exist to the eye and skin. The severity of these hazards is dependent upon the wavelength and the power output of the ...

Class 3a lasers and laser systems have an accessible output between 1-5 mW and do not pose a serous eye hazard unless viewed through optical instruments. Class 3b lasers and laser systems have an ...

The EHS “LASER Use Authorization Form” MUST be completed by researchers who plan to use Class 3B and Class 4 Lasers for their research. This application contains information regarding the type of ...

Up to 2.5 m range in a compact sensor. Varied offset distances for custom applications. Available in Blue diode wavelength for measuring hot objects. The sensors are intended for non-contact measuring ...

As of the time of this writing, any lasers that have been approved will be less than optimal for most applications in my opinion because they are relatively low powered. It is my experience that an ...

This Code of Practice is approved by the University Health, Safety and Environment Committee. It supports the University Laser Safety Policy by providing more detailed guidance to all staff and ...

While all lasers and laser systems (Class 1, Class 1M, Class 2, Class 2M and Class 3R, Class 3B and Class 4) should be used with caution, the program's purpose is to specifically ensure that all Class ...

The University requires that ALL Class 3R, 3B and 4 lasers are registered, risk assessed, and suitable control measures implemented. Heads of S/I/D are responsible for ensuring that all lasers within ...

To ensure the safety of our staff, students and visitors, it is the policy of Loughborough University to have nominated Departmental Laser Safety Officers in all departments which hold equipment ...